DispenseApply the mixed gel to the target component
4
AssembleInstall the heat sink or mating component
5
CureCure at room temperature or with heat
Frequently Asked Questions
Most ZNIM two-component gels are designed for a 1:1 mix by weight or volume. Ratio drift can slow cure, soften the elastomer, or reduce thermal performance. Use calibrated dual-cartridge or meter-mix equipment and follow the grade TDS.
Unopened dual cartridges typically offer a longer shelf life than one-component gels when stored sealed under the conditions in the TDS. After opening, observe pot life once Part A and Part B are mixed—do not return mixed material to the cartridge.
Two-component gels support manual dual-cartridge guns and fully automated meter-mix dispensing. A static mixing nozzle is required. Validate pressure, mix tip length, and dispense pattern on your line before volume production.
Room-temperature cure time depends on ambient temperature and humidity. Higher temperature accelerates cure; cold environments slow it. Heat-accelerated schedules in the TDS can shorten cycle time for high-volume lines.
Choose two-component when you need longer shelf life, structural support after cure, vibration damping, or elimination of pump-out. Choose one-component when you need no mixing, infinite working life, and easy rework.
Yes. Share your conductivity target, gap, cure schedule, and reliability requirements. Our engineers can recommend a standard grade or support custom formulation and sample verification.