image
Application Image
Process Efficiency & Performance
One-component thermal gel options include ready-to-use and heat-curing grades. Consult the selected product data sheet for its process requirements.
- check_circle Ready-to-use and heat-curing options
- check_circle Process requirements vary by grade
- check_circle Conforms to uneven and sensitive components
Series Specifications
01 Ready-to-Use One-Component Thermal Gel
| Image | Model | Thermal Conductivity (W/m·K) |
Flow Rate (g/min) |
Density (g/cm³) |
Hardness | Dielectric Strength (kV/mm) |
Key Feature | Actions |
|---|---|---|---|---|---|---|---|---|
|
TG0350B | 3.5 | 40 | 3.20 | — | 5.5 | Standard Grade | |
|
TG0600 | 6.0 | 22 | 3.30 | — | 5.0 | Balanced Performance | |
|
TG0600HF | 6.0 | 40 | 3.30 | — | 5.0 | High Flow Rate | |
|
TG0800 | 8.0 | 18 | 3.30 | — | 6.5 | High Thermal Conductivity | |
|
TG1000 | 10.0 | 28 | 3.20 | — | 6.5 | High Thermal Conductivity | |
|
TG1200 | 12.0 | 25 | 3.20 | — | 6.0 | Low Bond-Line Thickness | |
|
TG1200LB | 12.0 | 25 | 3.25 | — | ≥5.0 | Low Oil Bleeding |
02 Heat-Curing / Post-cured One-Component Thermal Gel
| Image | Model | Thermal Conductivity (W/m·K) |
Flow Rate (g/min) |
Density (g/cm³) |
Hardness After Cure (Shore 00) |
Dielectric Strength (kV/mm) |
Curing Condition | Actions |
|---|---|---|---|---|---|---|---|---|
|
TG0361C | 3.6 | 200 | 3.25 | 40–60 | 6.0 | 30–60 min @ 85°C | |
|
TG0600C | 6.0 | 35 | 3.40 | 65 | 6.0 | 60 min @ 100°C | |
|
TG1000C | 10.0 | 25 | 3.25 | 75 | 8.0 | 60 min @ 85°C / 30 min @ 100°C | |
|
TG1200C | 12.0 | 28 | 3.20 | 70 | 6.0 | 30–60 min @ 100°C / 15 min @ 150°C |
03 Low-Density One-Component Thermal Gel
| Image | Model | Thermal Conductivity (W/m·K) |
Flow Rate (g/min) |
Density (g/cm³) |
Hardness | Dielectric Strength (kV/mm) |
Key Feature | Actions |
|---|---|---|---|---|---|---|---|---|
|
TG0350LD | 3.5 | 19 | 2.25 | — | 5.0 | Ultra-Low Density | |
|
TG0601 | 6.0 | 22 | 2.96 | — | >5.0 | Low Density | |
|
TG0601LD | 6.0 | 23 | 2.70 | — | >5.0 | Low Density & Thin Bond Line |
Application Fit Guide
check_circle
check_circle Recommended When
- arrow_right High-throughput automated dispensing is required
- arrow_right Mixing equipment is not desired
- arrow_right PCB component height differences are large
- arrow_right Components are sensitive to compressive stress
- arrow_right Rework or disassembly maintenance is required
warning
warning Evaluate Carefully When
- arrow_right Vertical surfaces or inverted assembly
- arrow_right High vibration or high-impact conditions
- arrow_right Gap is too large without structural limiting
- arrow_right Long-term exposure to specific chemical environments
- arrow_right Strict limits on volatilization, precipitation, or migration
Dispensing Process Flow
precision_manufacturing
Process Image
- Surface Preparation
- Cartridge Loading
- Dispensing Setup
- Automated Dispensing
- Component Assembly
- Production Complete
Target Industries
electric_car
Automotive Electronics
ECUs, ADAS modules, and infotainment systems requiring high reliability.
router
Telecommunications
5G base stations, optical transceivers, and high-speed network switches.
dns
Server & Datacenter
High-density processors, GPUs, and memory modules with massive thermal loads.
solar_power
New Energy
Inverters, battery management systems, and high-power charging stations.
Frequently Asked Questions
Ready to optimize your thermal management?
Get Selection Advice from our engineering team based on your specific application requirements.